Iván Hernández Dalas: Quartz plant cuts cycle time 80% with ABB robots

America Quartz Technology (AQT) specializes in the manufacturing and processing of formed quartz products for the electronics and semiconductor industries at its plant in Hue, Vietnam. The production of AQT’s products demands the highest level of meticulousness and accuracy.

Challenges

Previously, components were processed manually, with workers performing high temperature heating processes. This dangerous and repetitive work meant that staff turnover was high, with an increased risk of accidents. There was also the risk of errors that could lead to serious production losses.

To solve these challenges, AQT decided it needed robots that would avoid labor shortages, reduce risk and improve productivity.

Solution

Having used ABB robots at its plants in the U.S., AQT approached ABB for a solution for its Hue plant. The result is a robot production cell consisting of an ABB IRB4600 industrial robot, an IRB2600 industrial robot and a moulding machine.

The ABB IRB4600 picks up the quartz workpiece and places it into position for the heat treatment process. Following this, the IRB2600 robot heats the workpiece evenly. Then, the cylinder mechanism sucks the heated quartz plate into the mould and shapes it. After 30 seconds, the vacuum valve shuts off, and the IRB 4600 robot removes the product and repeats the cycle.

an ABB industrial robot arm helps manufacture quartz at a factory in Vietnam

Results

Since the introduction of the robots, plant efficiency and performance has been significantly improved, with five times fewer defective products due to production errors.

“Using the solution provided by ABB, our products are now consistently completed to the highest quality, with less manual intervention required and a reduction in errors. Conditions have also improved for workers as all of the dangerous and repetitive work is now taken care of by the robots,” said Tran Phuoc Thanh Vu, factory manager, America Quartz Technology.

Another improvement has been a dramatic reduction in production cycle times. With the robotic process, production time has been reduced from 25 to just five minutes, with a current average output of 100 pieces a day, a four-fold increase on the previous manually-based production process.

“The solution brings enormous value to the plant – it improves production capacity, ensures on time delivery of customer orders and offers high stability during the production process,“ said Vu. “We always aim to have a modern and professional factory, using the latest techniques and technologies to achieve a lean production process and improve productivity. Our good experience with ABB robots means that we plan to invest in several robot stations for the plant in the coming year.”

The post Quartz plant cuts cycle time 80% with ABB robots appeared first on The Robot Report.



View Source

Popular posts from this blog

Iván Hernández Dalas: How Health Care Organizations Can Thwart Cyberattacks

Image
Ransomware and other types of cyberattacks are striking health care systems at an increasing rate. More than one in three health care organizations around the world reported ransomware attacks last year, according to a survey of IT professionals by security company Sophos . About 40 percent of the nearly 330 respondents from the health care sector that weren't attacked last year said they expect to be hit in the future. In the United States, the FBI , the Cybersecurity and Infrastructure Security Agency , and the Department of Health and Human Services were so concerned with the increase in cyberattacks on hospitals and other health care providers that in October they issued a joint advisory warning of the "increased and imminent cybercrime threat." But the health care field isn't helpless against cyber threats. The IEEE Standards Association Healthcare and Life Sciences Practice —which is focused on clinical health, the biopharmaceutical value chain, and welln
Read more

Iván Hernández Dalas: U.S. Passes Landmark Law to Fund Semiconductor Manufacturing

Image
Legislation aimed at increasing semiconductor manufacturing in the United States has finally passed both houses of Congress, following a multiyear journey that saw many mutations and delays. The CHIPS and Science Act , provides about $52 billion over 5 years to grow semiconductor manufacturing and authorizes a 25 percent tax credit for new or expanded facilities that make semiconductors or chipmaking equipment. It’s part of a $280 billion package aimed at improving the United States’ ability to compete in future technologies. And it comes amidst efforts by other nations and regions to boost chip manufacturing, an industry increasingly seen as a key to economic and military security. “This is going to make a huge difference in how the U.S. does innovation,” says Russell T. Harrison , acting managing director of IEEE-USA, who has been involved in the legislation since its beginnings more than two years ago. The bill’s $52 billion includes $39 billion in grants for new manufacturing,
Read more

Iván Hernández Dalas: Study: Almost 70% Think Some Companies Will Go Too Far With AI

Image
A new report today highlights anxiety that U.S. consumers have over the possibility of artificial intelligence going too far. Despite advances in robotics and self-driving cars, a majority of Americans reported mixed feelings about the benefits of AI, according to a study by Elicit. In its 14-page report titled “ Artificial Intelligence and the Very Real, Real-World Anxiety it Causes, ” the research consultancy found that news reports over intelligent personal assistants that have “gone rogue,” as well as Facebook’s misuse of personal data, have created distrust among consumers. Approximately seven out of 10 (73%) think that some companies will go too far with AI, and another six out of 10 “are concerned with how companies will use AI and the information they have to engage with them.”   This year, RoboBusiness includes four conferences to make it easier for you to find the information you need most. Whether you are involved in running a robotics business, designing products, o
Read more